Remote Control Transmitter learning procedure for Seat Cordoba, about 1997-1999 model years.
No tools required.
☛ To program the remote control transmitter for this vehicle, requires a working ignition key.
Step-by-Step guide:
1. Get into the car and close all doors.
2. Using the car key, switch ON the ignition briefly and switch OFF again. The switching time must remain under 5 seconds.
3. Remove the key from the ignition lock.
4. Press and hold the LOCK button in the remote control.
5. STILL PRESSING the LOCK button - press the UNLOCK button 3 times.
6. Release the LOCK button.
When done properly, the Central Locking system should automatically lock and then unlock.
Repeat procedurę from step 4 for learning additional Remote Control Transmitters.
Additional notes
PN of remote control transmitters: 1M0959753C (and compatible replacements).
comment here