Wireless Remote Generation
1.Prepare the Remote:
Ensure the universal NXP smart remote has a battery installed.
2.Place in the Coil:
Insert the remote into the coil of the CGDI K2 tool.
3.Generate:
Click “Generate Remote Control” on the interface and wait for the process to complete.
Important:
Do not remove the remote from the coil during generation.
4.Success: Once done, your wireless remote is ready to use!
When generating a wireless remote, the interface will be like this.
Just select the operation on the right. Other operations are the same.
Wired Remote Generation
1.Remove the PCB:
Take the wired remote apart to access its PCB. No battery is needed.
2.Connect to CGDI K2:
Use the provided cable to link the PCB to the tool.
3.Select the Remote:
Choose the desired remote model from the interface.
4.Generate:
Click “Generate Remote Control,” ensuring you select the wired option quickly.
Final Notes
- The CGDI K2 supports both wireless and wired remotes, making it a versatile tool for key generation.
- Always follow the on-screen instructions for smooth operation.
comment here