ANCEL DS100+ 4 System Car Diagnostic Scan Tool Automotive Scanner with 7 Special Functions + 3 Year Free Update Online + Multi Languages Supported

ANCEL DS100, is a new generation of modular high-end intelligent diagnostic equipment developed by ANCEL,featuring fully updated software's and powerful design of widespread vehicle coverage, abundant professional diagnostic features and exceptional hardware configuration etc., is the ideal scanner for professional mechanics and auto repair stores to perform all-around fixes and comprehensive tests.

ANCEL DS100 OBD2 4 System Diagnostic Scanner Professional

including reading fault codes, clearing fault codes, reading ECU ID information, and reading data streams.

Check ECM(Engine System):

Today’s engines are complex systems, using feedback loops from intake air temperature and flow, manifold absolute pressure, engine coolant temperature, crankshaft and camshaft position, oil pressure, fuel rail pressure, fuel tank pressure, vehicle speed and many other inputs to determine correct air/fuel ratios, camshaft timing, ignition timing and other, critical, operational parameters. The ANCEL DS100 obd2 scanner speeds diagnosis by providing the user access to critical OBD II standard data as well as extended, manufacturer specific, data on engine, fuel, emissions and performance parameters, at the touch of a button.

Check TCM(Transmission System):

Today’s automatic transmissions (A/T), like our engines have evolved into a complex system of mechanical, electrical and control systems interaction. Today’s transmissions provide a wealth of information about the success of up and downshifts, solenoid action (too harsh, too soft), clutch engagement, fluid temperature, fluid level, pressure, and other, critical, operational and diagnostic information. The ANCEL DS100 obd2 scanner provides the user a detailed view into this critical components operation and function, allowing fast, accurate and complete diagnosis of existing, or potential issues.

Check ABS(Anti-lock Braking System):

Like other systems, braking systems have evolved and become more complex, with multiple sensors and actuators operating together to make braking more smooth, consistent and safe for everyone. The ANCEL DS100 scanner allows the user to monitor and diagnose critical ABS systems to ensure that repairs to this critical system are effective, and complete.

Check SRS(Airbag System):

A well-functioning, always ready, Supplemental Restraint System (SRS) is absolutely critical for occupant and driver safety. Even minor issues might impact the operation, and performance, of the SRS system. The ANCEL DS100 quickly, and efficiently, allows the user to retrieve, read and interpret SRS system issues and monitor SRS system functionality to rapidly diagnose, and repair, the cause of the issue. Once repaired, The ANCEL DS100 will allow the code to be cleared and the SRS system to be tested, by the PCM, to ensure that the fixes are complete.

7 Hot Reset Service

ABS Bleeding: When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.

Battery Matching: When the Main battery is replaced, or battery monitoring sensor is replaced，battery matching must be performed. This function enables you to perform a resetting operation on the monitoring unit of the vehicle battery, in which the original low battery fault information will be cleared and the battery matching will be done.

EPB Reset: 1. The brake pad and brake pad wear sensor are replaced. 2. The brake pad indicator lamp is on. 3. The brake pad sensor circuit is short, which is recovered. The servo motor is replaced. By using this function, the braking process is therefore made much simpler and easier.

Throttle Relearn: This automotive scan tool can make initial settings to throttle actuators so you’ll have smooth dri-ving after the throttle body has been replaced or cleaned.

Gear Information Learning: The purpose of tooth signal learning is to ensure that the engine ignition timing is accurate and avoid engine failure caused by signal loss. Through tooth signal learning, the signal of the crankshaft position sensor can be recalibrated to restore the normal operation of the engine.

Oil Reset: If the service lamp is on, you need to reset the Oil Life Reminder and switch off the Oil Light for a new calculation of Engine Oil Life system. Your driving safety would gets ensuring. 2. After replacement engine oil, you need to reset the service lamp.

Steering Angle Learning:  After replacing the steering angle position sensor, LAUNCH CRP129E obd2 scanner can effectively perform SAS ca-libration, i.e., clear the fault steering angle sensor memories, set the steering angle to zero, and turn off steering wheel warn-ing light on supported models. You can easily set the steering in its default position and align it with the front tires.

Full OBD2 Function

This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:

1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9. Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

ANCEL DS100 Support the launguages you need

Chinese Spanish Arabic German Korean Slovak English Dutch Greek French Polish Czech Hungarian

Portuguese Turkish ltalian Russian Indonesia Japanese Swedish More

SUPPORT MODELS

American: /For Buick/For Chrysler/For Cadillac/For Chevrolet/For Dodge/For Ford(Australia)/For Fiat(Brazil)
/For Ford/For GM(Brazil)/For GM/For Jeep/For Lincoln/For SGM

European: /For Audi /For Aston Martin /For Alfa Romeo /For Abarth /For BMW /For Bentley /For Bugatti /For Citroen /For DR /For Dacia /For Ferrari /For Fiat /For Ford(Europe) /For GAZ /For Iveco /For IZH /For Jaguar /For Lancia /For Land Rover /For Lamborghini /For Maybach /For MAN TGE /For OBFCM /For OPEL(South Africa) /For OPEL /For PAZ /For Peugeot /For Porsche /For Polestar /For Rolls Royce /For Renault /For Rover /For SEAZ /For Saab /For Seat /For Skoda /For Smart /For Sprinter /For UAZ /For Vauxhall /For VAZ /For Volvo /For Mercedes-Benz /For VW CV /For MINI /For Maserati /For Volkswagen /For ZAZ

Asian:/For Acura /For Daewoo /For Daihatsu /For Genesis /For GTR(Nissan) /For Holden(Australia) /For Honda /For Hyundai /For LKCO /For Isuzu(Thailand) /For Isuzu /For Infiniti /For KIA /For Luxgen /For Lexus /For MVM /For Mahindra(India) /For Maruti(India) /For Mahindra /For Maruti /For Mazda /For Mitsubishi /For Nissan

Chinesse:/For Aion /For Bjey /For BAIC /For Beidou /For BYD /For Brilliance /For Buick(China) /For Changan /For Custom_Wey /For Custom_Oula /For Custom_Hafo /For Custom_Tanke /For Changhe Suzuki /For Changhe /For Custom_DS /For Custom_Jinbei /For Custom_Geruisi /For Custom_Zhonghua /For Custom_Huasong /For Custom_Jxwushiling /For Custom_Baojun /For Custom_Wuling /For Chery

24-Hour Technical Support Online Customer Service

Swift and Efficient Resolution of Customer Queries

Product Parameter

CPU：Quad-core 1.3GHz

Memory：2GB+32GB

Screen：5 inches 854*480

Working Voltage: 5V

Working Current: ≤ 2.5A

Working Environment: 0°C ~ 50°C (32°F ~ 122°F)

Software Configuration:

FAQ

Here we list some frequently asked questions and answers related to this device.

5.1 Q: Why is there no response when the device is connected to a vehicle?

A: Ensure the connection to the vehicle's diagnostic port is proper, the ignition switch is on, and that the

device supports the vehicle.

5.2 Q:Why does the system freeze while reading the data stream?

A: This could be due to a loose diagnostic connection. Please unplug the connector and reconnect it firmly.

5.3 Q: Why is there a communication error with the vehicle's ECU?

A: Please check the following:

* Ensure the diagnostic connector is properly connected.

* Confirm that the ignition switch is ON.

* If everything appears normal, please use the Feedback function to send us the vehicle's year, make, model, and

VIN number.

5.4 Q: Why does the screen flicker when the engine starts?

A: This is normal and is caused by electromagnetic interference.

5.5 Q:How do I upgrade the system software?

A: 1.Start the device and ensure a stable Internet connection.

2.Go to "Settings" -> "App Update," click "OTA," and then select "Check Version" to access the system upgrade

interface.

3.Follow the on-screen instructions to complete the upgrade. It may take a few minutes. After the upgrade is

successfully completed, the tool will automatically restart and return to the main interface.

6.WarrantyDeclaration