XTOOL InPlus IP900

XTOOL InPlus IP900--2024 Newest All-In-One Automotive Diagnostic Scan Tool Has Packed All Capabilities Auto Technicians Would ever need for daily repair & maintenance services: Added FCA AutoAuth Function, ECU Coding for VW, for Audi, for Skoda; PMI for Ford, for Lincoln, for Mazda; ECU Configurations, 38+ Services Resets, Relearns, Initializations, Adaptations, Bi-Directional Control, OE All Systems Diagnosis, Export Data & 8-In1 Graphing, 10,000 Car Coverage, CAN FD & DoIP, Android 10, Works with Key Programmers/ Endoscope/ EEPROM Adapter all into this 8'' diagnostic tablet.

OE-Level Full System Diagnostic

Inplus IP900 can perform complete system diagnoses to check ECU info, read codes, clear codes, and read freeze frames and live data. It can carry out a comprehensive diagnosis of cars' ssystems such as the engine, airbags, chassis, body, network system, transmission, anti-lock system, etc.
It is suitable for all systems, including ABSsystemsm, Engine systems, SAS systems, TPMS systems, IMMOsystemssm, Battesystemstem, Oil servsystemsstem,systemsystem, etc...ECMSystemsm (Engine Control Monitor), SRS (Supplement Restraint System), TCM (Transmission Control Module), IMMO (Immobilizer), ABS (Anti-lock Braking System), TPMS (Tire Pressure Monitoring System), BMS (Battery Monitor System), etc.

Bi-Directional Control(Active Test)

XTOOL InPlus IP900 bi-directional scanner supports active tests to output the command into the ECU to request information or command a module to perform specific tests and functions .To find faults in the subsystems of your car effortlessly, without using the vehicle’s control, including EVAP Test, Injector Buzz Test, EGR Test, Window/Mirror/Door Lock Test, A/C Clutch On/Off, ABS Pump Cycling, Pump and Value Tests, Interior & exterior lights Test, Sound horn Test, More...

FCA AutoAuth

For the 2018+ FCA vehicles (For Fiat, For Chrysler, For Jeep, For Alfa Romeo, etc.) equipped with the Security Gateway module, the XTOOL INPLUS IP919 car scanner can help you to log in to the FCA account and perform diagnostic functions such as clearing DTCs, bi-directional tests, and calibrations.

Note：We do not provide FCA accounts, Please register an FCA account yourself.

CANFD/DOIP Support

1. DOIP Support
With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN.
Compatible with For BMW (F&G chassis), For Volvo models (2018 later), For Land Rover & For Jaguar models (2017 later).

2. CAN FD Support
Supports the latest For GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.
For Onix 2020-2024, For Tracker 2020-2024, For Suburban 2021-2024, For Tahoe 2021-2024, For Montana 2024, For Silverado 2024, For Electra E5 2024, For Escalade 2021-2024, For Escalade ESV 2021-2024, For Sierra 2024, For Yukon 2021-202.2/2024, For Yukon XL 2021-202.2/2024, and For Chrysler Models including For Grand For Cherokee(WL) 2021-20203, For Grand For Wagoneer 2022-2024.
Note : this is car list that CANFD and DIOP supports , XTOOL IP919 also supports other cars , more than about 100+ brands , like for bmw , for vw , for ford etc , please feel free to contact with us check for you.

38+ Popular Special Functions

The XTOOL IP900 car diagnostic scanner tools performs More Than 38 commonly used maintenance functions that every mechanic wants to deal with the complex vehicle issues including:

• Oil Reset: Reset service intervals after oil change and turn off the oil light.
• EPB Reset: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired or replaced.
• SAS Adjustment: Perform calibration of the steering angle sensor to clear the fault steering angle sensor memories.
• BMS Reset: Register the new battery to the ECU after replacement.
• Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.
• ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.
• Injector Coding: Coding injectors after replacement.

Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.
And the full special functions under specific systems: Steering position sensor calibration, Zero Point Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Injector balance test, ECU Configuration, VGT Turbo Calibration, Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Crankshaft Sensors Relearn, Window Initialization, TPMS Reset, Suspension, Injector Coding, Airbag Repair, Cylinder Power Balance, Seat Configurations, Electronic Pump Activation, Disable Transportation, Performance Tire Upgrade, ECU configurations, A/F reset, Language change, Start/Stop Reset, etc.

Advanced ECU Coding & ECU Configuration


ECU Coding: for VW(For VW / AUDI / Škoda) / for BENZ / for Mitsubish: XTOOL IP900 OBD2 scanner performs ECU Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.

ECU Configuration: for BMW / VW / AUDI / Škoda / TOYOTA / LEXUS / SCION / MAZDA / FORD / LINCOLN: IP90 helps to activate the higher-level car functions and disable any annoying features including disabled the seat belt buzzer, wind the windows down with the remote fob, deactivate the Start/Stop function, etc.

VAG Guided Functions

IP900 can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/for Audi/for Skoda, etc.

IMMO / Key Programmer

Key programming means matching a smart key to a specific vehicle's security system. This process ensures that only the programmed paired key can start the vehicle, greatly increasing security. It is mainly used to replace lost or damaged car keys or to add additional spare keys. A thorough key programming process involves encoding a wireless signal between the smart key and the car, ensuring that the car receives and recognizes the signal and works as intended.

XTOOL IP900 offers key programming functions like programming new key fobs, reading PIN Code, adding smart keys, remote learning.
Main Functions:1.Key All-lost Matching2.Key Add Matching3.Key Info Reset4.Key Adding

8-in-1 Live Data Graphing

Allows you to view the live PID(parameter identification data) data of vehicle’s computer module(s) in text, graph to check the status of various sensors.Live Data Combine, 8-IN-1 Live Data PIDs, Live Data Playback & Record, Export as CSV Files.