Autel Maxisys MS908CV II Commercial Vehicle Diagnostic and Service Tablet
MaxiSYS MS908CVII is a 9.7" wireless touchscreen tablet with advanced diagnostics coverage for light-, medium-, and heavy-duty vehicles. All Systems fault detection via Auto Scan. Read and erase codes. View and graph live data. Perform Bi-directional control Active Tests and Special Functions. Expert Mode to enable technicians to access the system directly. The tablet features Android 10 OS, an Octa-Core processor, and 128 GB of storage memory.
Highlights & Notes
1. US Version. Can Only Be Used in USA Local Area. Other Countries Are Not Available
2. One Year Free Update Online. After 1Year, Autel MS908CV II Update Service Cost 999USD/Year
3. Support Coding Backup/ Reserve Date
4. Pre & Post Scan: Pre-Post Scanning will record vehicle status before and after diagnostics, helping you to locate problems and list suitable repair plans.
5. Smart AutoVIN 2.0 & AutoScan (2006+) gets you quick scan in seconds; 3X faster than those semi-truck scanner with J-2534 ECU featuring old-version AutoVIN
6. Endoscope Function: Work with Autel MV108S Endoscope (Not included) for inspection work for narrow or hidden areas in vehicle engines, transmissions, etc, which works as a "third"eyes for you to handle your repairs/ findings, etc.
7. Battery Test: works with Autel BT506 to test all 6V/ 12V 100-2000CCA batteries including the most regular Flooded, AGM, AGM Spiral, EFB & GEL batteries, supports CCA, CA, SAE, EN, IEC, DIN, JlS and MCA standards. Performs professional cranking/ charging system test, iand n-vehicle/ out-of vehicle battery test.
Features:
9.7" wireless touchscreen Heavy Duty Vehicle Diagnostics and Service Tablet
Performs advanced diagnostics on Class1-Class9 Heavy duty vehicles
Read and Erase codes, view live data, perform bi-directional active tests
Expert Mode for direct access to OE-specific system components, including engine, transmission, and braking systems
Extensive service and maintenance functions menu including forced DPF regen, EPB, and OLs
Perform Injector cutout tests, injector coding
Equipped with MaxiFlash wireless Bluetooth VCI/ J2534
AutoScan of all available modules
Supports newest communication protocols on light-duty vehicles with the purchase of MaxiVCI200
Wide CV Coverage
* Same diagnostics & vehicle coverage as MaxiSYS MS909CV, upgraded of MS908CV/ MS906CV, Autel MS908CV II supports both on-road and off-road vehicles.
* 150+ Light Duty/ Heavy Duty/ Trailer/ Special Vehicle/ Agricultural/ Construction makes (1996-2024) in the US market.
Functions:
1. Full CV Diagnosis
Widely apply to CV vehicles including Light/Heavy duty trucks (class 1-9), trailers, buses, special vehicles, and newly added agricultural & construction vehicles. Serve 150+ brands of CAPACITY, CATERPILLAR, DAEWOO, FORD, FOTON, VOLVO, WESTERNSTAR, etc.
1) DPF Regeneration
Clear Particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance, allowing you to know about the status of the sensor during the regeneration process.
2) Injector Cutout Test
Help you prevent and check your vehicle injectors and identify issues with individual cylinders, fuel injectors, and other components in your engine.
3) Injector Coding
After replacing the related ECU or injector, MS908CV II helps to code each cylinder to identify injectors and control fuel injection.
4) Oil Light Service
Use Autel MS908CV II to set zero to the oil light of CV Vehicles after finishing engine maintenance and set the next service mileage after changing the oil.
2. PRE-SCAN & POST-SCAN REPORTS
Autel MS908CV II features Pre-scan & Post-scan reports, which accurately locate the issues for in-depth analysis before repair & confirm after repairs.
3. Smart AutoVIN 2.0
AutoScan (2006+) gets you quick scan in seconds; 3X faster than those semi-truck scanner with J-2534 ECU featuring old-version AutoVIN.
4. GRAPHIC LIVE DATA FREEZE FRAME
Likeanother high-end scan tooll, Workshop scanner Autel MS908CV II supports all sensors live data in 4 formats (text, wave graph, histogram, meter diagram)
5. Advanced ECU Coding & J2534 Programmer
The MS908CV II, like the MS909CV, offers advanced CV ECU coding not supported by regular diagnostic tools. It allows you to adjust vehicle road speed, personalize CV functions, and fix failing coding processes. The J2534 programmer designed for CV helps improve drivability and fuel efficiency, erases fault codes, andprogramsm the latest software without expensive OE scanners, functioning at an OEM level.
1) Coding Backup/ Reserve Date
* Refresh Hidden Function
* Customize OE-Setting
* Online Parametric Configuration
* Improve Driving Comfortability
* Rematch Module Replacement/Calibration
2) J2534 Programming
* Pair with J2534 pass-thru device
* Update ECU software
* Change Re-programmed Option
6. Hot Service Functions:
Injector Coding: Code new injector numbers when fitting new injectors or after replacement.
Brake Reset: Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.
GEAR Learn: Perform gear learning for the car when the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced.
Oil Reset: Reset oil life systems after oil and oil filter changes.
SAS Reset: Perform steering angle sensor calibration and clear records.
BMS Reset: Evaluate battery charge state, register battery replacement, etc.
ABS Bleeding: Perform ABS bleeding function to restore ABS brake sensitivity when air is present.
Relearn Throttle: Initialize the throttle to return "learned" values stored on ECU to the default state.
DPF REG: Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize filter performance.
Note: Service and reset functions are not universal; check compatibility with your VIN before ordering.
Autel Truck Scanner Comparison List
| HARDWARE | MAXISYS MS908CV | MAXISYS MS908CV II | MAXISYS MS909CV |
| CONNECTION | J2534 MAXIFLASH ELITE WIRELESS BLUETOOTH | J2534 MAXIFLASH VCI WIRELESS BLUETOOTH | J2534 MAXIFLASH VCI WIRELESS BLUETOOTH |
| SCREEN | 9.7-INCH TOUCHSCREEN 1024 X 768 DPI / LED COLOR SCREEN | 9.7-INCH TOUCHSCREEN 1536 X 2048 DPI / LED COLOR SCREEN | 9.7-INCH TOUCHSCREEN 1536 X 2048 DPI / LED COLOR SCREEN |
| BATTERY | 11,000 mAh | 15,000 mAh | 15,000 mAh |
| PROCESSOR | 1.4GHz QUAD-CORE | 2.2GHz + 1.8GHz OCTA-CORE | 2.2GHz + 1.8GHz OCTA-CORE |
| MEMORY | 64GB SSD / 2GB RAM | 128GB SSD / 4GB RAM | 128GB SSD / 4GB RAM |
| CAMERA | 5.0MP WITH FLASHLIGHT | 16MP & 5.0MP FRONT & REAR WITH FLASHLIGHT | 16MP & 5.0MP FRONT & REAR WITH FLASHLIGHT |
| DOCKING STATION | — | — | — |
| SOFTWARE | |||
| OPERATING SYSTEM | ANDROID 4.4.2 | ANDROID 10.0 | ANDROID 10.0 |
| SOFTWARE UPDATES | 1 YEAR FREE | 1 YEAR FREE | 1 YEAR FREE |
| AUTOMATIC DETECTION | AUTO-VIN / AUTO-SCAN | AUTO-VIN / AUTO-SCAN / SCANVIN | AUTO-VIN / AUTO-SCAN / SCANVIN |
| SECURE GATEWAY ACCESS | AUTHORIZED FCA ACCESS WITH AUTOAUTH ACCOUNT | AUTHORIZED FCA ACCESS WITH AUTOAUTH ACCOUNT | AUTHORIZED FCA ACCESS WITH AUTOAUTH ACCOUNT |
| LICENSE PLATE READER | — | — | — |
| VEHICLE COVERAGE | CLASS 3 – CLASS 9 10,000LBS 33,000LBS | CLASS 3 – CLASS 9 10,000LBS 33,000LBS | CLASS 3 – CLASS 9 10,000LBS 33,000LBS |
| OBDII TEST MODES | ALL 10 TEST MODES LIVE & FREEZE FRAME / ENHANCED MODE 6 | — | ALL 10 TEST MODES LIVE & FREEZE FRAME / ENHANCED MODE 6 |
| SERVICE RESETS | 19 SERVICE FEATURES | 25 SERVICE FEATURES | 25 SERVICE FEATURES |
| DIESEL PM | CLASS 1-9 RESET DIESEL EMISSIONS | CLASS 1-9 RESET DIESEL EMISSIONS | CLASS 1-9 RESET DIESEL EMISSIONS |
| SYSTEM DIAGNOSTICS | ACCESS ALL MODULES IN ALL SYSTEMS ON SELECT VEHICLES | ACCESS ALL MODULES IN ALL SYSTEMS ON SELECT VEHICLES | ACCESS ALL MODULES IN ALL SYSTEMS ON SELECT VEHICLES |
| COMPONENT ACTIVATIONS | 1,000+ NEW WITH SOFTWARE UPDATE BI-DIRECTIONAL CONTROLS PDF REGEN / INJECTOR CODING | 1,000+ NEW WITH SOFTWARE UPDATES BI-DIRECTIONAL CONTROLS PDF REGEN / INJECTOR CODING | 1,000+ NEW WITH SOFTWARE UPDATES BI-DIRECTIONAL CONTROLS PDF REGEN / INJECTOR CODING |
| ENHANCED FUNCTIONS | ADVANCED CODING + ADAPTATIONS | ADVANCED CODING + ADAPTATIONS | ADVANCED CODING + ADAPTATIONS |
| ADAS CALIBRATION | — | — | ACCESS STATIC CALIBRATION CLASS 3-5* CLASS 6-8 DYNAMIC CALIBRATION *ADAS TARGET KITS SOLD SEPARATELY |
| BATTERY ANALYSIS | — | — | MAXIBAS SOFTWARE WITH MULTIMETER AMP CLAMPS & B200 INCLUDED |
| OSCILLOSCOPE | MP408 COMPATIBLE | — | — |
Specification:
| Operating System | Android 10 |
| Processor | Octa-core processor (2.2 GHz quad-core A73 + 1.8 GHz quad-core A53) |
| Memory | 4 GB RAM & 128 GB on-board memory |
| Display | 9.7 inch LED capacitive touchscreen with 2048 x 1536 resolution |
| Connectivity | · WiFi (802.11 a/b/g/n/ac) |
| · USB: 2.0 | |
| · Bluetooth v5.0 + EDR | |
| · SD Card (Support up to 64 GB) | |
| · HDMI | |
| Camera (rear) | 16.0 megapixels; autofocus with fa lashlight |
| Sensors | Gravity Accelerometer, Ambient Light Sensor (ALS) |
| Audio Input/Output | · Microphone |
| · Dual Speakers | |
| · 3-Band 3.5 mm stereo/standard headset jack | |
| Power and Battery | · 11000 mAh 3.7 V lithium-polymer battery · Charging via 12 V AC/DC power supply with a temperature between 0 °C and 45 °C |
| Input Voltage | 12 V (9-24 V) |
| Power Consumption | 6.5 W |
| Operating Temp | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage Temp | -20 °C to 60 °C (-4 °F to 140 °F) |
Package List:
1 x MaxiSYS MS908 CV II Main Unit
1 x MaxiFlash Elite J2534 ECU Programming Device
1 x AC / DC Adapter (12V)
1 x Main Cable
1 x USB Cable
1 x Mini USB Cable
1 x Clipper Cable
1 x Auxiliary Power Outlet Adapter
1 x Cigarette Lighter
1 x Light Fuse 6*30mm (2pcs)
1 x OBDII Extension Cable
1 x Uni -4 adapter
2 x JW1
2 x JW2
2 x JW3
2 x JW4
2 x JW5
2 x JW6
2 x JW7
2 x JW8
2 x JW9
2 x JW10
1 x Deutsch-6 Adapter
1 x Deutsch-9 Adapter
1 x USB to Ethernet Adapter
1 x Quick Reference Guide
1 x Packing List
1 x Soft Cloth
1 x Case
1 x Carrying Case
comment here